home8

Multisynth-based Architecture

Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
Equation: fOUT = fIN.N/P.R
Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.

New Any-Rate Clock Multiplier Architecture Simplifies Design
Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.

MultiSynth Technology
The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.

home5

Storytelling through Architecture

By Marina Correa Photography: Philippe Ruault; courtesy the architects

The Giraffe Childcare Centre designed by Hondelatte Laporte Architects introduces a dollop of fantasy into the routine lives of suburban Parisian townsfolk-

Niched between a towering structure, next to a neighbourhood built in the 70s and a newly constructed area, it was imperative that the healthcare centre did not -get lost’ within the urban landscape – hence the building is composed of three tiers and each is identified by a unique concrete animal sculpture.

The facades of the building are made out of white corrugated iron that provides a minimal background to the animal sculptures.

Interestingly, each of the south-facing playgrounds is in continuity with the interior spaces; while the urban landscape is animated using a child’s imagination. The wild animal sculptures appropriate a space: a giraffe appears to be peacefully eating the leaves of the trees from the neighbouring park; a polar bear tries to clamber up the steps, while a family of ladybirds climbs the faade in an attempt to reach the interior patio.

Architecture turns into storytelling. The building changes its identity and becomes a landscape in its own right; a metaphor for the urban jungle. The animals and the trees link the building to nature and motion.

Besides infusing a playful and poetic element, this building has also been awarded a green, zero energy efficiency label, making it not just aesthetically appeasing but also one that respects its environment.

Becoming a prominent landmark for the nursery, the affable animal forms transport us to a make-believe world. When pondered upon, definitely a project that goes way beyond the surface to attribute human characteristics and ethos to the emotional, functional routine of a child daycare centre.

to view images click on globalhop.indiaartndesign.com

images3

Architecture Today Getting The Feeling Of Home

Being elderly and needing daily support from a long term residential care facility doesnt mean your accommodation has to be plain, unstylish, boring, or worse – institutional. With a diverse selection of affordable architectural styles today, even long term care accommodation can let go of the utilitarian architecture and begin with a fresh new start of appealing design that reflects a home-like atmosphere in a functional package.

Designing senior living with a reflection of the past, a base of the practical present and a touch of the future are sure to meet the needs of the aging population as it continues to grow. The senior consumer of the future will come with many profiles and will be looking for living arrangements that reflect a wide expanse of taste, living requirements and values, at a range of price points from affordable to extravagant.

If you had the option to design and build your own home, or a facility that would become your home, wouldnt you let your imagination run wild and creativity soar to include and consider the many possible design options that exist in the resource bank of architecture?

Architecture today is a wide-open array of taste from the old world style with the accents of stone and stucco, tile roofs and heavy beams all very suitable to homebuyers looking for a connection to the historic past. A farmhouse or a country home with simple floor plans, warm colours and cozy spaces would please many individuals looking for a connection to an era of not so long ago. Ranch style homes of the 1950s are ever popular for those looking for a one floor living plan who are not afraid to recapture a retro look, or something more open with glass such as garden doors opening onto a landscaped patio or view of a park like backyard. Designing for seniors means paying attention to details such as uncluttered hallways and wheelchair accessible traffic zones, but it doesnt preclude the designer from planning style and space that feels like home.

Working with an architect to bring together your design ideas, your creativity, an outline of what your needs may be for comfort, space, budget, maintenance and functionality, are all necessary details and requirements that go in to the design of a building that not only serves its occupants but feels inviting like home.

images5

Pangnfe Advanced Ip Ngn Architecture Field Engineer

The Cisco IP Next-Generation Network (IP NGN) Structure Skills shows knowledge the IP NGN architecture, from revenue to support. The Innovative IP Next-Generation Network Structure Skills is not currently required for qualifications, but is optionally available for Gold and Leading qualified associates. We are also flying the addition of this specialization as an option for Gold Certification.

Is your organization interested in taking full advantage of the Cisco Innovative IP NGN Structure Skills for Gold Certification? If so, deliver an email that contains your associate organization name and a member of the program staff will contact you with more details.
Cisco IP NGN Structure Skills helps your company:

Develop revenue, specialized and service abilities for incorporated social media solutions

Increase specialized proficiency internally

Gain identification as a specialized associate in the Cisco Partner Locator

Explore IP NGN resources
This specialization also allows you to a range of additional benefits. You can:

Participate in Cisco route motivation programs

Receive invites to Cisco subsidized associate activities

Access Partner Knowledge Connection

Use My Cisco to customize web content and get details quickly

Send an argument stating your accomplishment

Visit the Cisco Design Area for examined styles and configurations
Exam 650-756

Examination 650-756 includes 60 concerns and time permitted to finish this exam is 60 moments or 1 time. This exam is available in British terminology. Candidates can sign-up for this exam at any Pearson VUE middle.

The 650-756 Innovative IP Next-Generation Network (NGN) Structure Area Professional (PANGNFE) examinations will determine a learner’s understanding of the Cisco IP NGN architecture and capability to map specialized alternatives to company needs. You will also need to show a knowing of the different foundations of the Cisco IP NGN architecture. This exam is a need of the Innovative IP NGN Structure Expertise for Area Technical engineers. Quality will determine a learner’s capability to provide an obvious and powerful concept around the functions, functions and advantages of the Cisco IP NGN architecture in business-focused conditions. It will also analyze a learner’s capability to evaluate typical problems throughout a company that Cisco IP NGN architecture can help fix and efficiency in introducing company influencers for Cisco IP NGN architecture programs.
650-754 Exam Topics

The following subjects are typical recommendations for the articles likely to be involved on the examination. However, other relevant subjects may also appear on any particular distribution of the examination. To be able to better indicate the 650-754 material of the examination and for quality requirements, the recommendations below may modify whenever without observe. They include:

Describe Cisco IP NGN conditions and advantages
Describe Cisco IP NGN alternatives and how to arrange them with client needs
Describe typical client objections
Describe the aggressive surroundings and how to place Cisco IP NGN solutions
Describe how to create and existing Cisco IP NGN alternatives as a company situation to the customer
Describe the company and specialized advantages of the Cisco IP NGN architecture
Describe the company individuals for Cisco IP NGN structure applications

images2

Understanding the SaaS architecture

SaaS or software as a service is an innovative system of using software that has a remarkable advantage over the traditional use of software. In this system, the entire software is present in a web browser. You pay a subscription fee and can use this software. e.

In normal cases, you buy software with a lump sum and take out a license or ownership of it. Then you can use it for six months or a year. In this case, you will receive updates on the software only when the sales rep visits you in your office. Moreover, there is a time lag as you acquire the software and get it up and running.

Unlike this system, the SaaS enjoys several advantages. You can start using the software as soon as you pay the subscription. It is remotely accessed. So, there is no time lag. Moreover, the subscriptions are often paid monthly. So, if you do not like the services of a provider, you can change it next month. Updates are also pushed frequently so that you remain at the cutting edge. As long as you are not working with intellectual property or other data of a sensitive nature, SaaS can be highly beneficial to you. These services are best suitable for platforms which use industry standard workflows. You can pay on monthly basis, though a few services are priced per transaction.

Some of the important elements of the SaaS architecture are as follows:

A user case model that portray a typical scenario. It showcases the back end data exchange.
A conceptual architecture. It gives a long term prediction with an overall view of the various SaaS elements which are required for its implementation.
Finally, reference architecture can greatly enhance the utility of the SaaS architecture. It often comes as a template architecture which can easily be applied to specific problems.

One of the best software as a service platform is provided by IBM. You can try their private cloud for the best SaaS. This is an application where you can actually customize the cloud computing. The best in-class technology and security standards that are the hallmark of IBM are used for these private cloud applications. The SaaS architecture of IBM is efficient and functional and therefore suited to your needs.

The private cloud architecture is such that it vastly improves utilization, economics, storage as well as network. It includes such diverse and advanced elements like virtualized storage where workloads are consolidated into a single system, the system z cloud solution where you can build your customized solution for the platform of your choice. The PureApplication system is another proprietary system of IBM that forms one of the elements of public cloud infrastructure. S Kirti is a web enthusiast and a writer. Kirti has afforded her articles and write-ups autonomously and through various online forums.

Get more information on: saas architecture & public cloud infrastructure

images7

Autodesk Revit Architecture 2011 Review

Buildings informational modelling (BIM) from Autodesk Revit Architecture 2011 may be the a fresh high engineering, which connects architects, developers and constructors. BIM engineering allows to formulate and talk, successfully create digital models at any period of method, to review behaviour of buildings in real conditions due to creation and using of coordinated, unified and connected designing information.

This post is used for producing essential selections, formation high-quality engineering specifications, operational characteristics predicting, an evaluation of expenditures and civil work planning, and then for creating infrastructure management.

Revit Architecture 2011 provides chance to focus on the main thing – the creative portion of buildings designing. You are able to assist model in different convenient rendering, easily and rapidly make changes, get ready working drawings on the basis of 3D models. Three-dimensional views will help to present your ideas towards the client a lot more visually. Even at past due periods building model customization will not bring any difficulties, because all cuts, facades, specifications along with other files are up-to-date immediately.

The building informational modelling supplies the full method of the structure designing due to electronic reproduction of actual construction process. You train with an uniform model, avoid separate files. The design parametrical changes technologies ensures coordination of all interconnected elements of the project – from types of models, cuts and plans approximately sheets of drawings and specifications.

The first type of a building is established from simple form building components in Autodesk Revit Architecture 2011 ; they can be received through the volume geometry created in Rhino, Sketchup, AutoCAD, 3D MAX, etc. In Architecture 2011 the imported objects are transformed to objects of the architectural composition, which then are transformed to objects to construct designing – walls, roof slopes, overlapping and safeguarding frameworks.

In Revit Architecture 2011 all 2D and three dimensional views, drawings and specifications are representation of the building database. All modifications extend on all model simultaneously, including the design documentation.

Autodesk Architecture 2011 will help you considerably reduce time and practical information on projecting, and also to improve quality of designing. Demonstration videos and interactive presentations will present link between your projects visually realistically. Revit Architecture offers architect several advantages both for private and group.

images7

Spanish Colonial Revival Style Architecture

Spanish revival architecture is hugely popular in California, and increasingly across the nation. The mission revival style and colonial revival styles grew in popularity at the beginning of the 20th century, but people today still chose to emulate the Spanish style when building their homes and public establishments. Why do people continue to use this Spanish style? I argue that the Spanish colonial style represents the very beginnings of the United States on the west coast, and this time in the US history continues to spark peoples imaginations. The aesthetic elements are iconic, and people still commission architects to create the homes of their dreams in this style.

The Spanish Colonial Revival style was created in the United States in the 20th century, and it was sparked after the opening of the Panama Canal. The novel Ramona also had a great influence on the popularity of this architectural style. The early Spanish colonies of North and South America had their particular style of architecture brought from the homeland, and this style was them updated to accommodate the new century in the US. Between 1915 and 1931 this style was all the rage, and movie stars in Hollywood clamored to get their Hollywood hills homes built in this style. Mostly the single-level detached home saw this style. On a personal note, my own grandmother has one of these homes in California, and its pink!

The Spanish Colonial Revival style is very similar to the Spanish Mission Revival style, but with a few key differences. Its also similar to the pueblo styles of the west and southwest, and influenced as well by the arts and crafts movement that was the foundation of these architectural styles. The iconic use of smooth plaster, stucco walls, and chimney finishes, clay tile roofs, terra cotta and concrete ornaments is still a highly noticeable, recognizable style. Other elements include porches and balconies, and Roman arcades and fountains. Youll also see canvas awnings. The most important Spanish Revival architect in California was George Washington Smith who practiced during 1920s and 1930s. Perhaps his most famous house is the Steedman House in Montecito, CA, now a museum called the Casa del Herrero.

But there are other architects who took this Spanish style across the globe. Take for example a lovely Spanish Revival building in St. Louis, by the architect T.P. Barnett, son of George I. Barnett; another famous architect in St. Louis. The T.P. Barnett building is particularly interesting because it also has Art Deco influences, making it one of the most unique buildings in the Grand Center region of St. Louis. Certainly the next time youre in St. Louis, you need to visit this Spanish Revival building on Washington Avenue.

images18

Importance of AutoCAD in the field of engineering and architecture

Computer has recently entered in every field known to any man and it gives great results when it was used. In the field of architecture and engineering, the need for the computer has become a necessity now a days there is no such work possible, which is made without using a computer. As technology has improved recently, so the choice of technical tools and specific software, which are used in these areas. And for this reason that the CAD or computer aided design and its improved version of the CADD or computer aided design and projects have emerged from behind the scenes to bring a sigh of relief for those who find that it is very hectic and time to sit down and design images of a building and the project plan for the purpose of engineering.

The AutoCAD or computer aided design machine has been a great help to engineers and also for several architectures that are finding it impossible to deal with drawings and plans of the project engineering work and the bring on the verge of perfection. The AutoCAD in these cases helped to design the architectural perfection before designing the actual architecture involved in the project. The AutoCAD has a very user friendly interface and its programming by the end had been done with the help of the famous C + + compiler. It operates in accordance with several other programs such as LISP, Auto LISP, VBA,. NET etc. and this may be one of the suits and tools used by engineers to simplify their work perfect.

Autocad or commonly known as computer aided design is a software application for writing and design 2D and 3D. He came on stage during the month of December nineteen hundred and eighty two. Autocad pioneered programs / DAC held on personal computers, particularly IBM personal computer. Meanwhile, the programs of most other CAD used to run on minicomputers or mainframes that were connected to the terminal graph of each user’s computer. vertical products Autocad and Autocad are incompatible for the type of BitDefender software security.

Appended below are the guidelines for free download for AutoCAD and AutoCAD relevant information about the free download. What we have to do is download the autocad trial for 30 days and learn about the design in 2D and 3D design and documentation platforms. One will have the opportunity of receiving the current version of CAD software with free download autocad. It can shape and design the world around him with the help of powerful and flexible features of AutoCAD design software and documentation, with the help of 2D and 3D worlds leading CAD tools.

Latest Information about Autocad

home11

How is 3D printing technology used in Architecture and Medicine

D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >

Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:

3D printing for Architecture

Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.

3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.

Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.

3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.

3D printing for Medicine

The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.

The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80% in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.

home1

Meenakshi Temple Madurai The Best Of Dravidian Architecture

Meenakshi Sundareswarar Temple or Meenakshi Amman Temple is a historic Hindu temple which is located in the city of Madurai in Tamil Nadu. This is among the most famous temples of India which is known throughout the world for its outstanding and impressive architectural beauty. In Hindu religion temple is the place which is reserved for spiritual and religious activities that include prayers and analogous rites.
Sri Meenakshi temple of Madurai is dedicated to Lord Shiva and his consort Goddess Meenakshi (Parvati). Goddess Meenakshi is an incarnation of the Goddess Parvati who is worshiped mainly by South Indians. The utmost architectural wonder of this templeis a testimony to the affluent Dravidian Culture. Some of the prominent features of this colossal temple are:

Temple Architecture:
This temple was built by Kulasekara Pandyan around 2000 years ago. The colossal structure of this temple is among the finest preserved monuments of the Dravidian style of temple architecture. Architectural and sculptural magnificence is the aspect of this temple which makes it popular throughout the world. The temple premise is surrounded by elevated wall which is adorned with various paintings and sculptures. The main deities of this temple are Lord Sundareswarar and Goddess Meenakshi, whose sanctums are encircled by number of smaller shrines and majestic pillared halls. Among the several magnificent structures the most striking ones are the 12 gopurams which are known for their bright colors painting and decoration of stucco figures of deities, animals, monsters, demigods, and celestial nymph.

Ashta Shakthi Mandapam:
This is located at the eastern entrance of the temple which is known for its 1,008 lamp holders. During festive occasions these lamps are lighted which gives spectacular sight to this place. Pillars of this structure are known for their carvings which depict the stories related to Meenakshi’s birth and LordShiva’s Thiruvilayadals (miracles). These pillars are carved on various mythological themes which mesmerizes visitors.

Meenakshi Nayakkar Mandapam:
It is situated adjacent to the Astha Shakthi Mandapam which is known for its 110 pillars. These pillars are famous for their beautiful carvings based on various religious and non-religious themes. A figure of animal with a lions body and an elephants head called Yalli is extremely beautiful.

Porthamarai Kulam (Golden Lotus Tank): >
This is the sacred lake situated inside the temple premises, in which devotees take bath. According to the Indian mythology it is believed that Indra bathed in this tank to wash away his sin, and then worshiped Lord Shiva with golden lotus flowers from the tank. It is surrounded by the corridor which is known for its beautiful sculptures based on various religious themes. The pillars on the northern side of this corridor are decorated with 24 poets of the Third Tamil Sangam.

Some of the other well known attractions of grand Dravidian style edifice are Oonjal Mandapam, Swami Sundareswarar Shrine, Kalyana Mandapam, Aayiram Kaal Mandapam or Thousand Pillar Hall and many more.